|
Connecting modular I/Os to EtherNet/IP |
|
|
|
|
 The IL EIP BK DI8 DO4 2TX-PAC Inline Ethernet bus coupler for EtherNet/IP from Phoenix Contact acts as a link between the I/O level and Ethernet. It is designed to connect up to 63 functional units, such as digital and analog inputs/outputs, counters, circuit breakers, and pneumatics, to the network. The 80-mm bus coupler not only enables field communication, but also manages some of the automation tasks with its eight integrated digital inputs and four integrated digital outputs.
The bus coupler offers full Inline functionality in process data and
PCP operation for up to eight devices, supports the operation of
500 kBd or 2 MBd modules, and can be easily configured with the help of
the Web-based management system.
This generation of bus couplers with on-board I/Os has a three-port
switch for simplifying the line structure that supports autodetection
and autocrossover in full-duplex 10/100 Mbaud operation.
To aid project planning with EtherNet/IP, Phoenix Contact has made an
EDS file with product-specific device data available on the Internet at
www.select.phoenixcontact.com.
www.phoenixcontact.ca
|
The IL EIP BK DI8 DO4 2TX-PAC Inline Ethernet bus coupler for EtherNet/IP from Phoenix Contact acts as a link between the I/O level and Ethernet. It is designed to connect up to 63 functional units, such as digital and analog inputs/outputs, counters, circuit breakers, and pneumatics, to the network. The 80-mm bus coupler not only enables field communication, but also manages some of the automation tasks with its eight integrated digital inputs and four integrated digital outputs.
